Follow these instructions:
1. On the remote in the left bottom you press and hold the on/off button.
Until this activates the shift option.
With the button Sect you can go up and with the button GRP you can go down.
To select an item press on the stop button.
2. Then you press on SPD1 to activate the menu.
3. In the menu you go to: Shutdown tp > Assign
4. Now enter the serial number of the transponder and choose 'Next'.
5. Now fill in the kart number.
Note: Be aware that the kart need to be turned on for this.
If you get: Connection Timeout, it means that it failed.